
LanguageOct 30, 2026
Solar panels help generate clean electricity, but solar production does not always match household or business demand. Storing surplus energy, maintaining power during grid interruptions and managing multiple energy sources can make a solar system more flexible.
The Growatt SPM-HU2 hybrid inverter series combines solar input, low-voltage battery compatibility, backup power and intelligent energy management. With models ranging from 2.5 kW to 10 kW, it offers options for different solar and storage requirements.
A hybrid solar inverter coordinates solar panels, batteries and compatible AC power sources. Depending on system configuration, solar energy can supply connected loads or charge the battery. When solar generation is insufficient, stored energy or grid electricity can help meet demand.
This flexibility helps users increase solar self-consumption, manage electricity use and prepare for grid interruptions without relying on solar generation alone.
Solar panels often generate the most electricity during daylight, while demand may rise in the evening. Compatible battery storage allows surplus solar energy to be stored for later use.
The SPM-HU2 supports compatible 40–60 V lithium and lead-acid batteries, as specified in the datasheets. Maximum battery charging and discharging current varies by model: 60–140 A across the SPM 2500–6000TL-HU2 range, up to 170 A for the SPM 8000TL-HU2, and up to 210 A for the SPM 10000TL-HU2.
For compatible lithium batteries, battery management system (BMS) communication helps coordinate inverter and battery operation. Actual savings depend on solar production, battery capacity, electricity tariffs and consumption.
A suitably configured battery and inverter system can help supply selected loads during a grid outage. The SPM-HU2 series specifies a backup switching time of less than 10 milliseconds under supported conditions, with rated backup output ranging from 2.5 kW to 10 kW depending on the model.
The datasheets also specify an overload capability of 200% of full load for 10 seconds under supported conditions. Actual backup performance depends on battery availability, connected loads and system design. Whole-home backup should not be assumed without a suitable installation.
When solar generation and stored energy are insufficient, a compatible generator or utility supply can provide another power source. The SPM-HU2 supports generator connection and configurable charging priorities for solar, AC and generator sources.
The series also supports DC-coupled, AC-coupled and AC-retrofit applications, offering flexibility for new installations and suitable retrofit projects. Type II surge protection is provided for the DC and AC sides. Installation and protection arrangements must follow the relevant model's documentation and applicable requirements.
The SPM-HU2 series features two Maximum Power Point Tracking (MPPT) trackers. Maximum recommended PV input power varies by model:
-SPM 2500TL-HU2: 4,000 W
-SPM 3000TL-HU2: 4,800 W
-SPM 3600TL-HU2: 5,760 W
-SPM 5000TL-HU2: 8,000 W
-SPM 6000TL-HU2: 9,600 W
-SPM 8000TL-HU2: 12,800 W
-SPM 10000TL-HU2: 16,000 W
The maximum DC voltage is 550 V. PV array design must comply with the selected model's voltage range, current limits and string configuration.
Parallel operation allows supported systems to expand as energy requirements change. The SPM 2500–6000TL-HU2 series supports up to nine units in parallel, while the SPM 8000–10000TL-HU2 series supports up to six. Supported configurations can also accommodate three-phase applications.
Parallel systems require compatible equipment, correct configuration and suitable electrical protection. Refer to the relevant model's datasheet and user manual when planning a system.
With compatible monitoring equipment, the SPM-HU2 supports Wi-Fi, 4G, Bluetooth and LAN communication options. The ShinePhone app provides system monitoring, while ShineTools supports local commissioning, parameter configuration, status monitoring and troubleshooting.
Configurable operating modes, time-of-use functionality and programmable supply priorities help users manage how solar, battery and grid power are used according to system capabilities and requirements.
The SPM-HU2 series combines key functions for flexible solar and battery storage:
-Dual MPPT: Two trackers for PV input management.
-Battery compatibility: Support for compatible 40–60 V lithium and lead-acid batteries.
-Backup power: Switching time of less than 10 milliseconds under specified conditions.
-Generator support: Compatible generator connection and configurable charging priorities.
-Flexible installation: DC-coupled, AC-coupled and AC-retrofit applications.
-System expansion: Parallel operation in supported configurations.
-Remote monitoring: Compatible Growatt monitoring and commissioning tools.
The right model depends on solar input, load requirements, battery compatibility, backup priorities and the planned system configuration.
A well-designed solar-plus-storage system can do more than generate electricity. By coordinating solar generation, battery storage and compatible AC sources, the Growatt SPM-HU2 hybrid inverter series helps users manage energy more flexibly.
With models from 2.5 kW to 10 kW, dual MPPT, low-voltage battery compatibility, generator support, backup functionality and parallel operation, the series offers options for different residential and small-business requirements.
Explore the Growatt SPM-HU2 Series:
-SPM 2500–6000TL-HU2 Hybrid Inverters:https://en.growatt.com/products/spm-2500-6000tl-hu-hu2
-SPM 8000–10000TL-HU2 Hybrid Inverters:https://en.growatt.com/products/sph-spm-8000-10000tl-hu-hu2
Subscribe to our newsletterSubscribe Now!
Subscribe
Insert your details below to receive information
*Enter Verification Code:
© Growatt New Energy All Rights Reserved

