Inverter

· MIC 800TL-X supports throttling to 600W, but MIC 600TL-X does not support upgrading to 800W. If you upgrade the output power of MIC 600TL-X to 800W, you will lose your warranty.

· 217 is the total code for battery fault, please check the specific error code on the inverter and contact us.

· To learn more about batteries, please check the topic of ‘Battery’.

· 401 is the code for meter fault, please check the topic of ‘Meter’ for details.

· If it is the initial installation of system, please check the PV terminals for poor contact problems and whether the PV voltage is within the required range.

· If all is well on the PV side, you can try a re-start in this order for a MIN XH/MOD XH+ARK XH system (Please note that this re-start sequence is only for systems using ARK XH):

  Switch off the battery→switch off the DC switch of the inverter→switch off the AC side. Next start the battery→switch on the DC switch→switch on the AC side.

· If the 411 error still exists after re-start, please keep the inverter and datalogger online, then contact us by email using the template in Basic Question 1, and we will upgrade the inverter for you.

· MIC 800TL-X supports throttling to 600W, but MIC 600TL-X does not support upgrading to 800W. If you upgrade the output power of MIC 600TL-X to 800W, you will lose your warranty.

· 217 is the total code for battery fault, please check the specific error code on the inverter and contact us.

· To learn more about batteries, please check the topic of ‘Battery’.

· 401 is the code for meter fault, please check the topic of ‘Meter’ for details.

· If it is the initial installation of system, please check the PV terminals for poor contact problems and whether the PV voltage is within the required range.

· If all is well on the PV side, you can try a re-start in this order for a MIN XH/MOD XH+ARK XH system (Please note that this re-start sequence is only for systems using ARK XH):

  Switch off the battery→switch off the DC switch of the inverter→switch off the AC side. Next start the battery→switch on the DC switch→switch on the AC side.

· If the 411 error still exists after re-start, please keep the inverter and datalogger online, then contact us by email using the template in Basic Question 1, and we will upgrade the inverter for you.

· MIC 800TL-X supports throttling to 600W, but MIC 600TL-X does not support upgrading to 800W. If you upgrade the output power of MIC 600TL-X to 800W, you will lose your warranty.

· 217 is the total code for battery fault, please check the specific error code on the inverter and contact us.

· To learn more about batteries, please check the topic of ‘Battery’.

· 401 is the code for meter fault, please check the topic of ‘Meter’ for details.

· If it is the initial installation of system, please check the PV terminals for poor contact problems and whether the PV voltage is within the required range.

· If all is well on the PV side, you can try a re-start in this order for a MIN XH/MOD XH+ARK XH system (Please note that this re-start sequence is only for systems using ARK XH):

  Switch off the battery→switch off the DC switch of the inverter→switch off the AC side. Next start the battery→switch on the DC switch→switch on the AC side.

· If the 411 error still exists after re-start, please keep the inverter and datalogger online, then contact us by email using the template in Basic Question 1, and we will upgrade the inverter for you.

· MIC 800TL-X supports throttling to 600W, but MIC 600TL-X does not support upgrading to 800W. If you upgrade the output power of MIC 600TL-X to 800W, you will lose your warranty.

· 217 is the total code for battery fault, please check the specific error code on the inverter and contact us.

· To learn more about batteries, please check the topic of ‘Battery’.

· 401 is the code for meter fault, please check the topic of ‘Meter’ for details.

· If it is the initial installation of system, please check the PV terminals for poor contact problems and whether the PV voltage is within the required range.

· If all is well on the PV side, you can try a re-start in this order for a MIN XH/MOD XH+ARK XH system (Please note that this re-start sequence is only for systems using ARK XH):

  Switch off the battery→switch off the DC switch of the inverter→switch off the AC side. Next start the battery→switch on the DC switch→switch on the AC side.

· If the 411 error still exists after re-start, please keep the inverter and datalogger online, then contact us by email using the template in Basic Question 1, and we will upgrade the inverter for you.

· MIC 800TL-X supports throttling to 600W, but MIC 600TL-X does not support upgrading to 800W. If you upgrade the output power of MIC 600TL-X to 800W, you will lose your warranty.

· 217 is the total code for battery fault, please check the specific error code on the inverter and contact us.

· To learn more about batteries, please check the topic of ‘Battery’.

· 401 is the code for meter fault, please check the topic of ‘Meter’ for details.

· If it is the initial installation of system, please check the PV terminals for poor contact problems and whether the PV voltage is within the required range.

· If all is well on the PV side, you can try a re-start in this order for a MIN XH/MOD XH+ARK XH system (Please note that this re-start sequence is only for systems using ARK XH):

  Switch off the battery→switch off the DC switch of the inverter→switch off the AC side. Next start the battery→switch on the DC switch→switch on the AC side.

· If the 411 error still exists after re-start, please keep the inverter and datalogger online, then contact us by email using the template in Basic Question 1, and we will upgrade the inverter for you.

· MIC 800TL-X supports throttling to 600W, but MIC 600TL-X does not support upgrading to 800W. If you upgrade the output power of MIC 600TL-X to 800W, you will lose your warranty.

· 217 is the total code for battery fault, please check the specific error code on the inverter and contact us.

· To learn more about batteries, please check the topic of ‘Battery’.

· 401 is the code for meter fault, please check the topic of ‘Meter’ for details.

· If it is the initial installation of system, please check the PV terminals for poor contact problems and whether the PV voltage is within the required range.

· If all is well on the PV side, you can try a re-start in this order for a MIN XH/MOD XH+ARK XH system (Please note that this re-start sequence is only for systems using ARK XH):

  Switch off the battery→switch off the DC switch of the inverter→switch off the AC side. Next start the battery→switch on the DC switch→switch on the AC side.

· If the 411 error still exists after re-start, please keep the inverter and datalogger online, then contact us by email using the template in Basic Question 1, and we will upgrade the inverter for you.